Secondhand 6HI Reversible Cluster Rolling Mill

SCHLOEMANN 6HI CLUSTER MKW REVERSING MILL
Available in USA.
Machine on foundation.
Immediate shipping to any port.

5" X 27" X 31” SCHLOEMANN 6 HIGH CLUSTER MKW REVERSING MILL

MAKER:SCHLOEMANN, GERMANY
BUILT:New in 1970
REBUILT:AGC & Solid State Controls new in 2000

Material:Hot Rolled/Cold Rolled-Low and High Carbon Steel

Strip Width:26" (675mm) - 12 1/4" (311mm)

Strip Thickness:0.375" (9.5mm) - 0.020" (.5mm)
"Currently being used for, can go lower."

Rolling Speed:600 - 1500 FPM (180 - 460 Meters/Min)

Strip Tension:26,556 Lbs (14 Tons)

Maximum Strip Thickness in Rewinding Line:0.125" - (3mm)

Coil Capacity:
Entry:
28,080 lbs. Maximum (14 Ton)
O.D. Max: 72"/2000mm
I.D.: 18" - 24"/500-610mm

Exit:
27,638 lbs. Maximum (13.5 Ton)
O.D. Max: 72"/2000mm Maximum
I.D.: 20"/500mm

Target Capacity
11.75 tons per running hour

Roll Sizes:
Work Roll:5.00"/127mm Diameter, 31.5"/800mm Face
Back-up Roll:27.20"/691mm Diameter, 31.5"/800mm Face
Intermediate Roll:3.97"/100mm Diameter
Support Roll:7.87"/200mm Diameter

Motor Sizes
2 - 1,000 HP DC Mill Motors (2000 HP)
4 - 600 HP DC Reel Motors (2 per reel) 1200 HP
1 - 100 HP DC Payoff Motor
2 - 100 HP DC Rewrap Motors

Drives
7 - G.E Model 2000 DC Drives
Operation Interface: MMI + 2 - OC2000

Updated with the following all New in 2000
Hydraulic Screw Downs
AGC Control System
GE Solid State Digital Drives with PLC
SC 2000 Stand Controller
OC 2000 Read Out Panel
(2) Accu-Ray Digital X-Ray Gauges
Feed Forward, Feed Back, Mass Load

Featuring
Top & Bottom Crowning, Negative or Positive
Back-Up Roll Driven
Oil Mist Roller Bearings on All Rolls
Off-Set Roll Design
Turret Re-Wrap Station

Complete With:
Entry Coil Car
Mandrel Uncoiler
4 Leaf Hydraulic Expansion
Sliding Base
Edge Control Unit
Peeler Hold down Roll
Pinch Roll Stand

Reel #1
Full Hydraulic Drum Out Board Support
Crop Shear
X-Ray Gauge
Mill Stand with Hydraulic Screw downs
X-Ray Gauge

Reel #2
Turret Design for Re-Wrap Station
Hydraulic Drum
Out Board Support
Exit Recoiler
Hydraulic Drum
Sliding Base
Feed-Up Table
Coil Car

Transformers
1 - AC Auxiliary - G.E. Dry Type
1500 KVA, 4800 / 480 Volts
Installed December 1994

1 - Left Reel Motor - G.E. Dry Type
1285 KVA, 4800 Volts
Installed December 1993

1 - Main Mill Motor - G.E. Dry Type
2050 KVA, 4800 Volts
Installed December 1993

1 - Right Reel Motor - G.E. Dry Type
1285 KVA, 4800 Volts
Installed December 1993

Roll Count:
2 Sets of Back-Up Rolls
1 Spare Back-Up Roll
12 Intermediate Rolls
65 Work Rolls

Complete mill with Hydraulics, Electrics and Controls.
Spare Parts and Engineering drawings
Complete Mill Currently In Plant under Power