Secondhand Ring Rolling Plant

Wagner VRW 40-400/130 Automatic Ring Forging Line
Wagner Model VRW 40-400/130
Automatic Ring Forging Line [87202]

Manufacturer: Wagner
Model: VRW 40-400/130
Diameter: 160 - 400mm
Ring height: 130mm
Bar length range: 2,000 – 6,000mm

This line consists of the following:
15 ton Bar Storage and Loading Device
Induction heater
1,250 ton Hydraulic Press, type S/RSt Po 1Z/1250 w/Hot Cutting Shear
Automatic transfer btwn press and rolling mill.
(2) 4 - 40 Model VRW 40-400/130 ton Automatic Vertical Radial Mills
Automatic transfer btwn ring rolling mill and calibrating press
400 ton 2-Col. Single Crank Calibrating press w/Pneumatic Loading & Extracting device
For the production of forged rings for cylindrical gears with square or rectangular
diametrical cross-section
OR
For profiling with 160-400mm (6.29-15.75") dia, 130mm bar height with a bar length of
2,000-6,000mm (78.75–236.22")
This line includes the following:
A. 15 ton Bar storage and loading device
B. 2,400 kw (3,218.4 hp), 1,000V, 1.1Hz Induction Heater
6 ton/hour productivity
130mm (5.11") bar diameter
1,250 C (2,282 F)
C. 1,250 ton Electrical Hydraulic Press Model Type S/RSt Po 1Z/1250 for Ring Pieces
w/Hot Cutting Shear

Working pressure – 250 kgs/cm2
Distance between columns – 2,000mm (78.75")
Table – 1,500 x 1,200mm (59.05 x 47.25")
Slide – 1,180 x 800mm (46.45 x 31.50")
Height – 1,300mm (51.18")
Slide stroke – 500mm (19.68")
Main motor – 800kw (1,072hp)
Max. ring work piece dia – 300mm (11.81")
Productivity – 20 unit/hour
160 ton Cutting Shear
Stroke – 250mm (9.85")
Cutting diameter – 160mm (6.30")
Work piece dia – 130 – 350mm (5.11 – 13.77")
D. 3.75kw (8.02hp) Automatic transfer between the press and rolling mill
E. (2) 4 - 40 ton Model VRW 40-400/130 Automatic Vertical-Radial Mills
Main roll driver – 160kw (214.5hp) 150-1,500 RPM
Pump power – 45kw (60.3hp)
Productivity – 110 unit/hour (each transmitter)
Ring dimension:
Diameter – 160 – 400mm (6.30 – 15.75")
Height – 60 – 130mm (2.36 – 5.11")
F. Automatic transfer between ring rolling mill and calibrating press

NOTE:
An effort has been made to assure the above specifications are accurate,
however, it is the sole responsibility of the buyer to confirm the actual model,
capacity, attachments, accessories,extras and condition.
We urge buyers to inspect all machinery and equipment prior to purchase.
Subject to Prior Sale
EX WORKS EUROPEAN PLANT